Tub Drain SLOWLY Drains - If You Hold “Knob” Down It Drains At Regular SpeedWhy are there bubbles in my bathroom toilet and sink?What could cause my toilets to bubble and clear water to come out of the clean out pipe?Do tub drains of the same diameter ever have different thread-per-inch counts?Why is my shower not draining, even though there is no physical blockage?Tub drains very slowWhat else can I try to fix a clogged drain?Question about fixing footer drains with no accessToilet not flushing after floodingSlow drain after tub-to-shower conversionHow do I remove the connected **plunger** of a bathtub linkage assembly that won't fit through the opening?
Multi tool use
What is to the west of Westeros?
Why did it take so long for Germany to allow electric scooters / e-rollers on the roads?
Storing voxels for a voxel Engine in C++
Why is std::ssize() introduced in C++20
Flatten not working
What happened to the Dothraki in S08E06?
One word for 'the thing that attracts me'?
"Official wife" or "Formal wife"?
Why A=2 and B=1 in the call signs for Spirit and Opportunity?
How would a developer who mostly fixed bugs for years at a company call out their contributions in their CV?
Is there an idiom that means that you are in a very strong negotiation position in a negotiation?
What is the use case for non-breathable waterproof pants?
Are runways booked by airlines to land their planes?
If I arrive in the UK, and then head to mainland Europe, does my Schengen visa 90 day limit start when I arrived in the UK, or mainland Europe?
(For training purposes) Are there any openings with rook pawns that are more effective than others (and if so, what are they)?
Can attacking players use activated abilities after blockers have been declared?
Python script to extract text from PDF with images
Why do testers need root cause analysis?
Maximum interval between Alto & Tenor, & intervals when writing for SATB
Why does the painters tape have to be blue?
Align vertices between two edges
How to write numbers and percentage?
What is the limit to a Glyph of Warding's trigger?
Unary Enumeration
Tub Drain SLOWLY Drains - If You Hold “Knob” Down It Drains At Regular Speed
Why are there bubbles in my bathroom toilet and sink?What could cause my toilets to bubble and clear water to come out of the clean out pipe?Do tub drains of the same diameter ever have different thread-per-inch counts?Why is my shower not draining, even though there is no physical blockage?Tub drains very slowWhat else can I try to fix a clogged drain?Question about fixing footer drains with no accessToilet not flushing after floodingSlow drain after tub-to-shower conversionHow do I remove the connected **plunger** of a bathtub linkage assembly that won't fit through the opening?
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty margin-bottom:0;
I am sure this is just due to age and wear and tear on the drain, but I do not know where to start. My drain slowly drains, but if I hold the "knob" down it will drain at regular speed.
What should be my steps to replace parts in order for the drain to drain regular speed all the time?
EDIT
I pulled out the "knob" all the way out and the spring appears to be in tact as well as all connections. When out of the wall, I can lift the "knob" up and down with no issue and the "weight" (or whatever you'd call it at the bottom) moves freely. Surprisingly, there wasn't even that much hair or gunk built up on anything.
See this image, does someone notice anything off?
plumbing shower
add a comment |
I am sure this is just due to age and wear and tear on the drain, but I do not know where to start. My drain slowly drains, but if I hold the "knob" down it will drain at regular speed.
What should be my steps to replace parts in order for the drain to drain regular speed all the time?
EDIT
I pulled out the "knob" all the way out and the spring appears to be in tact as well as all connections. When out of the wall, I can lift the "knob" up and down with no issue and the "weight" (or whatever you'd call it at the bottom) moves freely. Surprisingly, there wasn't even that much hair or gunk built up on anything.
See this image, does someone notice anything off?
plumbing shower
add a comment |
I am sure this is just due to age and wear and tear on the drain, but I do not know where to start. My drain slowly drains, but if I hold the "knob" down it will drain at regular speed.
What should be my steps to replace parts in order for the drain to drain regular speed all the time?
EDIT
I pulled out the "knob" all the way out and the spring appears to be in tact as well as all connections. When out of the wall, I can lift the "knob" up and down with no issue and the "weight" (or whatever you'd call it at the bottom) moves freely. Surprisingly, there wasn't even that much hair or gunk built up on anything.
See this image, does someone notice anything off?
plumbing shower
I am sure this is just due to age and wear and tear on the drain, but I do not know where to start. My drain slowly drains, but if I hold the "knob" down it will drain at regular speed.
What should be my steps to replace parts in order for the drain to drain regular speed all the time?
EDIT
I pulled out the "knob" all the way out and the spring appears to be in tact as well as all connections. When out of the wall, I can lift the "knob" up and down with no issue and the "weight" (or whatever you'd call it at the bottom) moves freely. Surprisingly, there wasn't even that much hair or gunk built up on anything.
See this image, does someone notice anything off?
plumbing shower
plumbing shower
edited May 9 at 15:30
user2676140
asked May 9 at 0:22
user2676140user2676140
23929
23929
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
I assume you mean the "knob" is the drain open/closed lever located on the wall of the tub,.just above the drain, right?
If so, your most likely problem is that the drain mechanism is out of alignment. There is an "overflow drain" that runs down from behind the drain lever that you are holding, connects to the main tub drain, and continues out to whereever.
Inside that downward drain is a metal arm that connects to the tub drain open/close lever (the "knob"). When you move the drain lever up or down, it causes that metal arm to move up or down in opposition (It's like a seesaw, when this end goes up, the back end goes down.)
The metal arm is attached to a metal plug that will block the main tub drain, or release it.
You can unscrew the face plate behind the drain lever and pull out the face plate with the lever, the metal arm, and the plug. Once you have them out, you can almost certainly adjust the arm, changing the position of the plug up or down. That lets you set the position exactly right.
It may be that your drain lever doesn't stay put any more. If so, you will need a new set- these things come in packages from your local home center. According to my smartphone app with the orange icon, they sell for $20 USD upwards, depending on color and style.
2
Also possible that the drain plug attached to the mechanism has a build-up of hair, etc, and simply needs to be removed (it will look rather disgisting if this is the case, be warned) and cleaned, then replaced.
– Ecnerwal
May 9 at 3:07
@Ecnerwal That's the kind of "DIY secret" that you leave for the newbie to discover themselves. :-) :-) :-)
– Austin Hastings
May 9 at 3:20
@AustinHastings - yes the open/closed lever is what I was referencing when I said "knob" - It is middle of night for me, I will investigate in the morning, but thank you kindly for this insight!
– user2676140
May 9 at 4:37
2
It could also be as simple as the spring behind the tub drain lever is worn out and needs replacing. The spring is what holds the lever down (and the linkage and plug all the way up behind the plate). The fact that manually holding it down allows proper drainage perhaps supports this...
– Jimmy Fix-it
May 9 at 4:38
@JimmyFix-it- the spring appears in-tact. See my edit with the image.
– user2676140
May 9 at 15:31
|
show 2 more comments
I had a very similar problem and I replaced the spring as @jimmy-fix-it suggested and it fixed my problem. In my case, the knob felt loose and when you opened it, it settled a bit causing the slow draining.
Can you purchase just the spring from a box store or will I need to get the entire kit?
– user2676140
May 9 at 16:46
If you can find a plumbing store, you can get a replacement spring but the big home improvement stores only carry the whole assembly.
– tk421
May 9 at 17:04
I don’t have a plumbing store local to me. What is the “technical” term for the part in looking for? Drain repair kit and shower drain repair kit return results that are not relevant.
– user2676140
May 9 at 18:15
bathtub drain lever
is what I would use to search for. Something like this might work: homedepot.com/p/…
– tk421
May 9 at 19:07
actually loosening the washer and pushing things up has it draining properly, but now the ding dang cold valve stem is dripping water when it's turned on. I just replaced the shower diverter/valve stem (whatever the technical term for that would be) on this shower, and to save time down the road, I think I'm just going to replace both the hot and cold valve stems right now to avoid having to replace the hot one later.
– user2676140
May 9 at 19:10
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "73"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f164698%2ftub-drain-slowly-drains-if-you-hold-knob-down-it-drains-at-regular-speed%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I assume you mean the "knob" is the drain open/closed lever located on the wall of the tub,.just above the drain, right?
If so, your most likely problem is that the drain mechanism is out of alignment. There is an "overflow drain" that runs down from behind the drain lever that you are holding, connects to the main tub drain, and continues out to whereever.
Inside that downward drain is a metal arm that connects to the tub drain open/close lever (the "knob"). When you move the drain lever up or down, it causes that metal arm to move up or down in opposition (It's like a seesaw, when this end goes up, the back end goes down.)
The metal arm is attached to a metal plug that will block the main tub drain, or release it.
You can unscrew the face plate behind the drain lever and pull out the face plate with the lever, the metal arm, and the plug. Once you have them out, you can almost certainly adjust the arm, changing the position of the plug up or down. That lets you set the position exactly right.
It may be that your drain lever doesn't stay put any more. If so, you will need a new set- these things come in packages from your local home center. According to my smartphone app with the orange icon, they sell for $20 USD upwards, depending on color and style.
2
Also possible that the drain plug attached to the mechanism has a build-up of hair, etc, and simply needs to be removed (it will look rather disgisting if this is the case, be warned) and cleaned, then replaced.
– Ecnerwal
May 9 at 3:07
@Ecnerwal That's the kind of "DIY secret" that you leave for the newbie to discover themselves. :-) :-) :-)
– Austin Hastings
May 9 at 3:20
@AustinHastings - yes the open/closed lever is what I was referencing when I said "knob" - It is middle of night for me, I will investigate in the morning, but thank you kindly for this insight!
– user2676140
May 9 at 4:37
2
It could also be as simple as the spring behind the tub drain lever is worn out and needs replacing. The spring is what holds the lever down (and the linkage and plug all the way up behind the plate). The fact that manually holding it down allows proper drainage perhaps supports this...
– Jimmy Fix-it
May 9 at 4:38
@JimmyFix-it- the spring appears in-tact. See my edit with the image.
– user2676140
May 9 at 15:31
|
show 2 more comments
I assume you mean the "knob" is the drain open/closed lever located on the wall of the tub,.just above the drain, right?
If so, your most likely problem is that the drain mechanism is out of alignment. There is an "overflow drain" that runs down from behind the drain lever that you are holding, connects to the main tub drain, and continues out to whereever.
Inside that downward drain is a metal arm that connects to the tub drain open/close lever (the "knob"). When you move the drain lever up or down, it causes that metal arm to move up or down in opposition (It's like a seesaw, when this end goes up, the back end goes down.)
The metal arm is attached to a metal plug that will block the main tub drain, or release it.
You can unscrew the face plate behind the drain lever and pull out the face plate with the lever, the metal arm, and the plug. Once you have them out, you can almost certainly adjust the arm, changing the position of the plug up or down. That lets you set the position exactly right.
It may be that your drain lever doesn't stay put any more. If so, you will need a new set- these things come in packages from your local home center. According to my smartphone app with the orange icon, they sell for $20 USD upwards, depending on color and style.
2
Also possible that the drain plug attached to the mechanism has a build-up of hair, etc, and simply needs to be removed (it will look rather disgisting if this is the case, be warned) and cleaned, then replaced.
– Ecnerwal
May 9 at 3:07
@Ecnerwal That's the kind of "DIY secret" that you leave for the newbie to discover themselves. :-) :-) :-)
– Austin Hastings
May 9 at 3:20
@AustinHastings - yes the open/closed lever is what I was referencing when I said "knob" - It is middle of night for me, I will investigate in the morning, but thank you kindly for this insight!
– user2676140
May 9 at 4:37
2
It could also be as simple as the spring behind the tub drain lever is worn out and needs replacing. The spring is what holds the lever down (and the linkage and plug all the way up behind the plate). The fact that manually holding it down allows proper drainage perhaps supports this...
– Jimmy Fix-it
May 9 at 4:38
@JimmyFix-it- the spring appears in-tact. See my edit with the image.
– user2676140
May 9 at 15:31
|
show 2 more comments
I assume you mean the "knob" is the drain open/closed lever located on the wall of the tub,.just above the drain, right?
If so, your most likely problem is that the drain mechanism is out of alignment. There is an "overflow drain" that runs down from behind the drain lever that you are holding, connects to the main tub drain, and continues out to whereever.
Inside that downward drain is a metal arm that connects to the tub drain open/close lever (the "knob"). When you move the drain lever up or down, it causes that metal arm to move up or down in opposition (It's like a seesaw, when this end goes up, the back end goes down.)
The metal arm is attached to a metal plug that will block the main tub drain, or release it.
You can unscrew the face plate behind the drain lever and pull out the face plate with the lever, the metal arm, and the plug. Once you have them out, you can almost certainly adjust the arm, changing the position of the plug up or down. That lets you set the position exactly right.
It may be that your drain lever doesn't stay put any more. If so, you will need a new set- these things come in packages from your local home center. According to my smartphone app with the orange icon, they sell for $20 USD upwards, depending on color and style.
I assume you mean the "knob" is the drain open/closed lever located on the wall of the tub,.just above the drain, right?
If so, your most likely problem is that the drain mechanism is out of alignment. There is an "overflow drain" that runs down from behind the drain lever that you are holding, connects to the main tub drain, and continues out to whereever.
Inside that downward drain is a metal arm that connects to the tub drain open/close lever (the "knob"). When you move the drain lever up or down, it causes that metal arm to move up or down in opposition (It's like a seesaw, when this end goes up, the back end goes down.)
The metal arm is attached to a metal plug that will block the main tub drain, or release it.
You can unscrew the face plate behind the drain lever and pull out the face plate with the lever, the metal arm, and the plug. Once you have them out, you can almost certainly adjust the arm, changing the position of the plug up or down. That lets you set the position exactly right.
It may be that your drain lever doesn't stay put any more. If so, you will need a new set- these things come in packages from your local home center. According to my smartphone app with the orange icon, they sell for $20 USD upwards, depending on color and style.
edited May 9 at 13:32
answered May 9 at 0:47
Austin HastingsAustin Hastings
44927
44927
2
Also possible that the drain plug attached to the mechanism has a build-up of hair, etc, and simply needs to be removed (it will look rather disgisting if this is the case, be warned) and cleaned, then replaced.
– Ecnerwal
May 9 at 3:07
@Ecnerwal That's the kind of "DIY secret" that you leave for the newbie to discover themselves. :-) :-) :-)
– Austin Hastings
May 9 at 3:20
@AustinHastings - yes the open/closed lever is what I was referencing when I said "knob" - It is middle of night for me, I will investigate in the morning, but thank you kindly for this insight!
– user2676140
May 9 at 4:37
2
It could also be as simple as the spring behind the tub drain lever is worn out and needs replacing. The spring is what holds the lever down (and the linkage and plug all the way up behind the plate). The fact that manually holding it down allows proper drainage perhaps supports this...
– Jimmy Fix-it
May 9 at 4:38
@JimmyFix-it- the spring appears in-tact. See my edit with the image.
– user2676140
May 9 at 15:31
|
show 2 more comments
2
Also possible that the drain plug attached to the mechanism has a build-up of hair, etc, and simply needs to be removed (it will look rather disgisting if this is the case, be warned) and cleaned, then replaced.
– Ecnerwal
May 9 at 3:07
@Ecnerwal That's the kind of "DIY secret" that you leave for the newbie to discover themselves. :-) :-) :-)
– Austin Hastings
May 9 at 3:20
@AustinHastings - yes the open/closed lever is what I was referencing when I said "knob" - It is middle of night for me, I will investigate in the morning, but thank you kindly for this insight!
– user2676140
May 9 at 4:37
2
It could also be as simple as the spring behind the tub drain lever is worn out and needs replacing. The spring is what holds the lever down (and the linkage and plug all the way up behind the plate). The fact that manually holding it down allows proper drainage perhaps supports this...
– Jimmy Fix-it
May 9 at 4:38
@JimmyFix-it- the spring appears in-tact. See my edit with the image.
– user2676140
May 9 at 15:31
2
2
Also possible that the drain plug attached to the mechanism has a build-up of hair, etc, and simply needs to be removed (it will look rather disgisting if this is the case, be warned) and cleaned, then replaced.
– Ecnerwal
May 9 at 3:07
Also possible that the drain plug attached to the mechanism has a build-up of hair, etc, and simply needs to be removed (it will look rather disgisting if this is the case, be warned) and cleaned, then replaced.
– Ecnerwal
May 9 at 3:07
@Ecnerwal That's the kind of "DIY secret" that you leave for the newbie to discover themselves. :-) :-) :-)
– Austin Hastings
May 9 at 3:20
@Ecnerwal That's the kind of "DIY secret" that you leave for the newbie to discover themselves. :-) :-) :-)
– Austin Hastings
May 9 at 3:20
@AustinHastings - yes the open/closed lever is what I was referencing when I said "knob" - It is middle of night for me, I will investigate in the morning, but thank you kindly for this insight!
– user2676140
May 9 at 4:37
@AustinHastings - yes the open/closed lever is what I was referencing when I said "knob" - It is middle of night for me, I will investigate in the morning, but thank you kindly for this insight!
– user2676140
May 9 at 4:37
2
2
It could also be as simple as the spring behind the tub drain lever is worn out and needs replacing. The spring is what holds the lever down (and the linkage and plug all the way up behind the plate). The fact that manually holding it down allows proper drainage perhaps supports this...
– Jimmy Fix-it
May 9 at 4:38
It could also be as simple as the spring behind the tub drain lever is worn out and needs replacing. The spring is what holds the lever down (and the linkage and plug all the way up behind the plate). The fact that manually holding it down allows proper drainage perhaps supports this...
– Jimmy Fix-it
May 9 at 4:38
@JimmyFix-it- the spring appears in-tact. See my edit with the image.
– user2676140
May 9 at 15:31
@JimmyFix-it- the spring appears in-tact. See my edit with the image.
– user2676140
May 9 at 15:31
|
show 2 more comments
I had a very similar problem and I replaced the spring as @jimmy-fix-it suggested and it fixed my problem. In my case, the knob felt loose and when you opened it, it settled a bit causing the slow draining.
Can you purchase just the spring from a box store or will I need to get the entire kit?
– user2676140
May 9 at 16:46
If you can find a plumbing store, you can get a replacement spring but the big home improvement stores only carry the whole assembly.
– tk421
May 9 at 17:04
I don’t have a plumbing store local to me. What is the “technical” term for the part in looking for? Drain repair kit and shower drain repair kit return results that are not relevant.
– user2676140
May 9 at 18:15
bathtub drain lever
is what I would use to search for. Something like this might work: homedepot.com/p/…
– tk421
May 9 at 19:07
actually loosening the washer and pushing things up has it draining properly, but now the ding dang cold valve stem is dripping water when it's turned on. I just replaced the shower diverter/valve stem (whatever the technical term for that would be) on this shower, and to save time down the road, I think I'm just going to replace both the hot and cold valve stems right now to avoid having to replace the hot one later.
– user2676140
May 9 at 19:10
add a comment |
I had a very similar problem and I replaced the spring as @jimmy-fix-it suggested and it fixed my problem. In my case, the knob felt loose and when you opened it, it settled a bit causing the slow draining.
Can you purchase just the spring from a box store or will I need to get the entire kit?
– user2676140
May 9 at 16:46
If you can find a plumbing store, you can get a replacement spring but the big home improvement stores only carry the whole assembly.
– tk421
May 9 at 17:04
I don’t have a plumbing store local to me. What is the “technical” term for the part in looking for? Drain repair kit and shower drain repair kit return results that are not relevant.
– user2676140
May 9 at 18:15
bathtub drain lever
is what I would use to search for. Something like this might work: homedepot.com/p/…
– tk421
May 9 at 19:07
actually loosening the washer and pushing things up has it draining properly, but now the ding dang cold valve stem is dripping water when it's turned on. I just replaced the shower diverter/valve stem (whatever the technical term for that would be) on this shower, and to save time down the road, I think I'm just going to replace both the hot and cold valve stems right now to avoid having to replace the hot one later.
– user2676140
May 9 at 19:10
add a comment |
I had a very similar problem and I replaced the spring as @jimmy-fix-it suggested and it fixed my problem. In my case, the knob felt loose and when you opened it, it settled a bit causing the slow draining.
I had a very similar problem and I replaced the spring as @jimmy-fix-it suggested and it fixed my problem. In my case, the knob felt loose and when you opened it, it settled a bit causing the slow draining.
answered May 9 at 16:23
tk421tk421
248110
248110
Can you purchase just the spring from a box store or will I need to get the entire kit?
– user2676140
May 9 at 16:46
If you can find a plumbing store, you can get a replacement spring but the big home improvement stores only carry the whole assembly.
– tk421
May 9 at 17:04
I don’t have a plumbing store local to me. What is the “technical” term for the part in looking for? Drain repair kit and shower drain repair kit return results that are not relevant.
– user2676140
May 9 at 18:15
bathtub drain lever
is what I would use to search for. Something like this might work: homedepot.com/p/…
– tk421
May 9 at 19:07
actually loosening the washer and pushing things up has it draining properly, but now the ding dang cold valve stem is dripping water when it's turned on. I just replaced the shower diverter/valve stem (whatever the technical term for that would be) on this shower, and to save time down the road, I think I'm just going to replace both the hot and cold valve stems right now to avoid having to replace the hot one later.
– user2676140
May 9 at 19:10
add a comment |
Can you purchase just the spring from a box store or will I need to get the entire kit?
– user2676140
May 9 at 16:46
If you can find a plumbing store, you can get a replacement spring but the big home improvement stores only carry the whole assembly.
– tk421
May 9 at 17:04
I don’t have a plumbing store local to me. What is the “technical” term for the part in looking for? Drain repair kit and shower drain repair kit return results that are not relevant.
– user2676140
May 9 at 18:15
bathtub drain lever
is what I would use to search for. Something like this might work: homedepot.com/p/…
– tk421
May 9 at 19:07
actually loosening the washer and pushing things up has it draining properly, but now the ding dang cold valve stem is dripping water when it's turned on. I just replaced the shower diverter/valve stem (whatever the technical term for that would be) on this shower, and to save time down the road, I think I'm just going to replace both the hot and cold valve stems right now to avoid having to replace the hot one later.
– user2676140
May 9 at 19:10
Can you purchase just the spring from a box store or will I need to get the entire kit?
– user2676140
May 9 at 16:46
Can you purchase just the spring from a box store or will I need to get the entire kit?
– user2676140
May 9 at 16:46
If you can find a plumbing store, you can get a replacement spring but the big home improvement stores only carry the whole assembly.
– tk421
May 9 at 17:04
If you can find a plumbing store, you can get a replacement spring but the big home improvement stores only carry the whole assembly.
– tk421
May 9 at 17:04
I don’t have a plumbing store local to me. What is the “technical” term for the part in looking for? Drain repair kit and shower drain repair kit return results that are not relevant.
– user2676140
May 9 at 18:15
I don’t have a plumbing store local to me. What is the “technical” term for the part in looking for? Drain repair kit and shower drain repair kit return results that are not relevant.
– user2676140
May 9 at 18:15
bathtub drain lever
is what I would use to search for. Something like this might work: homedepot.com/p/…– tk421
May 9 at 19:07
bathtub drain lever
is what I would use to search for. Something like this might work: homedepot.com/p/…– tk421
May 9 at 19:07
actually loosening the washer and pushing things up has it draining properly, but now the ding dang cold valve stem is dripping water when it's turned on. I just replaced the shower diverter/valve stem (whatever the technical term for that would be) on this shower, and to save time down the road, I think I'm just going to replace both the hot and cold valve stems right now to avoid having to replace the hot one later.
– user2676140
May 9 at 19:10
actually loosening the washer and pushing things up has it draining properly, but now the ding dang cold valve stem is dripping water when it's turned on. I just replaced the shower diverter/valve stem (whatever the technical term for that would be) on this shower, and to save time down the road, I think I'm just going to replace both the hot and cold valve stems right now to avoid having to replace the hot one later.
– user2676140
May 9 at 19:10
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f164698%2ftub-drain-slowly-drains-if-you-hold-knob-down-it-drains-at-regular-speed%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
VFr 8ygsATtvDtkusVk kaA vK81hDY85kdsiFdznh,b