Windows 10 clients can't connect to HostAPDHow do I diagnose problems of dropped packets on a wireless network?Setting up access to FTP server and SSH server using hostapd access point on embedded systemWhy is hostapd not working?Windows 8 wifi problems with certain WAPs?hostapd, rtl8192se and wpa not working: EAPOL-Key TimeoutHow to link hostapd to physical wireless card via ethernet?Linux Hostapd registers as WEP, but I want WPA2-PSKhostapd Wired 802.1x with BridgeDNSMASQ config for captive portalHostapd - Download speed artificially limited?
Can I run a new neutral wire to repair a broken circuit?
What does the expression "A Mann!" means
Expand and Contract
Arrow those variables!
Should I cover my bicycle overnight while bikepacking?
What method can I use to design a dungeon difficult enough that the PCs can't make it through without killing them?
Why do bosons tend to occupy the same state?
How to Recreate this in LaTeX? (Unsure What the Notation is Called)
How do I gain back my faith in my PhD degree?
Why are the 737's rear doors unusable in a water landing?
Cursor Replacement for Newbies
Mathematica command that allows it to read my intentions
iPad being using in wall mount battery swollen
Why no variance term in Bayesian logistic regression?
How do I deal with an unproductive colleague in a small company?
Why can't we play rap on piano?
Why didn't Boeing produce its own regional jet?
How did the Super Star Destroyer Executor get destroyed exactly?
Im going to France and my passport expires June 19th
Size of subfigure fitting its content (tikzpicture)
Why was the shrinking from 8″ made only to 5.25″ and not smaller (4″ or less)?
Intersection Puzzle
GFCI outlets - can they be repaired? Are they really needed at the end of a circuit?
CAST throwing error when run in stored procedure but not when run as raw query
Windows 10 clients can't connect to HostAPD
How do I diagnose problems of dropped packets on a wireless network?Setting up access to FTP server and SSH server using hostapd access point on embedded systemWhy is hostapd not working?Windows 8 wifi problems with certain WAPs?hostapd, rtl8192se and wpa not working: EAPOL-Key TimeoutHow to link hostapd to physical wireless card via ethernet?Linux Hostapd registers as WEP, but I want WPA2-PSKhostapd Wired 802.1x with BridgeDNSMASQ config for captive portalHostapd - Download speed artificially limited?
I have an access point running on a linux server.
I'm using hostapd 2.4 on ubuntu 16.04.
wifi adapter: Intel® Centrino® Advanced-N 6235
android, iphone, linux computers, and windows 7(don't have a windows 8 box to test with) and earlier windows can connect just fine. But Windows 10 systems can't. I Think it may be related to this https://support.microsoft.com/en-us/kb/3121002 (there was a eap error in the windows event log), Is there some additional configuration options to hostapd I can set to make this work. I didn't think a radius server would be necessary for wpa-psk.
The windows 10 clients won't connect if I set hostapd as an open connection as well.
Here's my hostapd.conf
interface=wlan0
driver=nl80211
ssid=hostname
channel=6
wpa=3
wpa_passphrase=password
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
Any help would be greatly appreciated.
linux windows wifi hostapd
edited 2 days ago
yagmoth555♦
12.3k31842
asked Sep 9 '16 at 12:13
richmbrichmb
1184
add a comment |
I have an access point running on a linux server.
I'm using hostapd 2.4 on ubuntu 16.04.
wifi adapter: Intel® Centrino® Advanced-N 6235
android, iphone, linux computers, and windows 7(don't have a windows 8 box to test with) and earlier windows can connect just fine. But Windows 10 systems can't. I Think it may be related to this https://support.microsoft.com/en-us/kb/3121002 (there was a eap error in the windows event log), Is there some additional configuration options to hostapd I can set to make this work. I didn't think a radius server would be necessary for wpa-psk.
The windows 10 clients won't connect if I set hostapd as an open connection as well.
Here's my hostapd.conf
interface=wlan0
driver=nl80211
ssid=hostname
channel=6
wpa=3
wpa_passphrase=password
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
Any help would be greatly appreciated.
linux windows wifi hostapd
edited 2 days ago
yagmoth555♦
12.3k31842
asked Sep 9 '16 at 12:13
richmbrichmb
1184
add a comment |
I have an access point running on a linux server.
I'm using hostapd 2.4 on ubuntu 16.04.
wifi adapter: Intel® Centrino® Advanced-N 6235
android, iphone, linux computers, and windows 7(don't have a windows 8 box to test with) and earlier windows can connect just fine. But Windows 10 systems can't. I Think it may be related to this https://support.microsoft.com/en-us/kb/3121002 (there was a eap error in the windows event log), Is there some additional configuration options to hostapd I can set to make this work. I didn't think a radius server would be necessary for wpa-psk.
The windows 10 clients won't connect if I set hostapd as an open connection as well.
Here's my hostapd.conf
interface=wlan0
driver=nl80211
ssid=hostname
channel=6
wpa=3
wpa_passphrase=password
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
Any help would be greatly appreciated.
linux windows wifi hostapd
edited 2 days ago
yagmoth555♦
12.3k31842
asked Sep 9 '16 at 12:13
richmbrichmb
1184
I have an access point running on a linux server.
I'm using hostapd 2.4 on ubuntu 16.04.
wifi adapter: Intel® Centrino® Advanced-N 6235
android, iphone, linux computers, and windows 7(don't have a windows 8 box to test with) and earlier windows can connect just fine. But Windows 10 systems can't. I Think it may be related to this https://support.microsoft.com/en-us/kb/3121002 (there was a eap error in the windows event log), Is there some additional configuration options to hostapd I can set to make this work. I didn't think a radius server would be necessary for wpa-psk.
The windows 10 clients won't connect if I set hostapd as an open connection as well.
Here's my hostapd.conf
interface=wlan0
driver=nl80211
ssid=hostname
channel=6
wpa=3
wpa_passphrase=password
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
Any help would be greatly appreciated.
linux windows wifi hostapd
linux windows wifi hostapd
edited 2 days ago
yagmoth555♦
12.3k31842
asked Sep 9 '16 at 12:13
richmbrichmb
1184
edited 2 days ago
yagmoth555♦
12.3k31842
asked Sep 9 '16 at 12:13
richmbrichmb
1184
edited 2 days ago
yagmoth555♦
12.3k31842
edited 2 days ago
yagmoth555♦
12.3k31842
edited 2 days ago
yagmoth555♦
12.3k31842
12.3k31842
asked Sep 9 '16 at 12:13
richmbrichmb
1184
asked Sep 9 '16 at 12:13
richmbrichmb
1184
asked Sep 9 '16 at 12:13
richmbrichmb
1184
1184
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Try to set
wpa=2
this configuration worked for me
interface=wlan0
ssid=$SSID
hw_mode=g
wpa=2
ieee8021x=0
eap_server=0
ignore_broadcast_ssid=0
wpa_passphrase=$PASSWORD
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
channel=5
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "2"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f802080%2fwindows-10-clients-cant-connect-to-hostapd%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Try to set
wpa=2
this configuration worked for me
interface=wlan0
ssid=$SSID
hw_mode=g
wpa=2
ieee8021x=0
eap_server=0
ignore_broadcast_ssid=0
wpa_passphrase=$PASSWORD
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
channel=5
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
add a comment |
Try to set
wpa=2
this configuration worked for me
interface=wlan0
ssid=$SSID
hw_mode=g
wpa=2
ieee8021x=0
eap_server=0
ignore_broadcast_ssid=0
wpa_passphrase=$PASSWORD
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
channel=5
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
add a comment |
Try to set
wpa=2
this configuration worked for me
interface=wlan0
ssid=$SSID
hw_mode=g
wpa=2
ieee8021x=0
eap_server=0
ignore_broadcast_ssid=0
wpa_passphrase=$PASSWORD
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
channel=5
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
Try to set
wpa=2
this configuration worked for me
interface=wlan0
ssid=$SSID
hw_mode=g
wpa=2
ieee8021x=0
eap_server=0
ignore_broadcast_ssid=0
wpa_passphrase=$PASSWORD
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
channel=5
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
answered Feb 13 '17 at 13:32
Manuel TonellaManuel Tonella
111
111
add a comment |
add a comment |
Thanks for contributing an answer to Server Fault!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f802080%2fwindows-10-clients-cant-connect-to-hostapd%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
