What are the G forces leaving Earth orbit?If the Apollo mandate were delivered today, would the mission vehicle(s) and profile be similar?Launch Accelerations: Values, historyHas in-space refueling been done?What does burnt Aerozine-50/N2O4 smell like?What is the escape velocity of Saturn at Enceladus distance?Would the Saturn V have been able to send more mass to TLI if it had a lower earth parking orbit?In what ways would the high elliptical orbit of Apollo “E missions” simulate lunar missions?Hypersonic Inflatable Aerodynamic Decelerator entry to Mars' atmosphereHow long is the Apollo Lunar Module extraction window?Has any human had the capability of leaving the Solar System?
Modeling an IP Address
Which country benefited the most from UN Security Council vetoes?
Java Casting: Java 11 throws LambdaConversionException while 1.8 does not
Can you really stack all of this on an Opportunity Attack?
How to source a part of a file
Why "Having chlorophyll without photosynthesis is actually very dangerous" and "like living with a bomb"?
Does detail obscure or enhance action?
Can a Cauchy sequence converge for one metric while not converging for another?
Approximately how much travel time was saved by the opening of the Suez Canal in 1869?
How does one intimidate enemies without having the capacity for violence?
Languages that we cannot (dis)prove to be Context-Free
Today is the Center
Did Shadowfax go to Valinor?
Why can't I see bouncing of switch on oscilloscope screen?
What does it mean to describe someone as a butt steak?
Theorems that impeded progress
NMaximize is not converging to a solution
How do I deal with an unproductive colleague in a small company?
Paid for article while in US on F-1 visa?
Alternative to sending password over mail?
Is it possible to do 50 km distance without any previous training?
What's the point of deactivating Num Lock on login screens?
Mortgage Pre-approval / Loan - Apply Alone or with Fiancée?
Do I have a twin with permutated remainders?
What are the G forces leaving Earth orbit?
If the Apollo mandate were delivered today, would the mission vehicle(s) and profile be similar?Launch Accelerations: Values, historyHas in-space refueling been done?What does burnt Aerozine-50/N2O4 smell like?What is the escape velocity of Saturn at Enceladus distance?Would the Saturn V have been able to send more mass to TLI if it had a lower earth parking orbit?In what ways would the high elliptical orbit of Apollo “E missions” simulate lunar missions?Hypersonic Inflatable Aerodynamic Decelerator entry to Mars' atmosphereHow long is the Apollo Lunar Module extraction window?Has any human had the capability of leaving the Solar System?
$begingroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
$endgroup$
add a comment |
$begingroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
$endgroup$
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
Apr 2 at 20:17
add a comment |
$begingroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
$endgroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
apollo-program escape-velocity trans-lunar-injection
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
asked Apr 2 at 19:31
Bob516Bob516
1,9501421
1,9501421
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
Apr 2 at 20:17
add a comment |
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
Apr 2 at 20:17
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
Apr 2 at 20:17
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
Apr 2 at 20:17
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.6g, increasing as fuel mass is exhausted, and finishing up around 1.45g, according to this graph from the Apollo 11 flight evaluation report:
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
There was some vibration noticed by the crew during the S-IVB burns. For subjective impressions, the best source is the crew debriefings done after each mission, though in this case they're surprisingly varied.
In the debriefing for Apollo 11, Aldrin said it was a "rougher ride than the S-II" (second stage, which presumably 'averaged out' the roughness of each individual engine across the set of five, and had more structure between the engines and the crew cabin to damp vibrations through) and Armstrong said it was "a little rattly all the time". (These comments were in regard to the orbital insertion phase of the S-IVB but were probably applicable to the TLI as well.)
The crew of Apollo 10 found it a little rougher, with Stafford saying "Where the S-IC stage and the S-II stage were completely smooth, the S-IVB growled, rattled, and rolled during the whole burn. But you could actually feel little vibrations."
Conrad on Apollo 12 was more positive: "S-IVB ignition was smooth. The ride on the S-IVB was very nice."
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
$endgroup$
add a comment |
$begingroup$
This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
What were the G forces experienced by the Apollo astronauts during the translunar injection burn?
My Haynes doesn't seem to give specific figures, but the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph above leaves off and increase somewhat as the fuel was depleted. It would also jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
edited Apr 2 at 22:42
uhoh
40.2k18149507
answered Apr 2 at 20:49
GregGreg
98939
$endgroup$
3
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
Apr 2 at 21:26
1
$begingroup$
Dangit! I guess I didn't notice that. And my Haynes doesn't seem to give specific figures. But the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph left off and increased a bit as the fuel was depleted, then jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
$endgroup$
– Greg
Apr 2 at 21:37
$begingroup$
@Greg I've added your comment back into your answer, does that look okay?
$endgroup$
– uhoh
Apr 2 at 22:42
$begingroup$
uhoh That looks fine, thanks.
$endgroup$
– Greg
2 days ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
return StackExchange.using("mathjaxEditing", function ()
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
);
);
, "mathjax-editing");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "508"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35244%2fwhat-are-the-g-forces-leaving-earth-orbit%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.6g, increasing as fuel mass is exhausted, and finishing up around 1.45g, according to this graph from the Apollo 11 flight evaluation report:
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
There was some vibration noticed by the crew during the S-IVB burns. For subjective impressions, the best source is the crew debriefings done after each mission, though in this case they're surprisingly varied.
In the debriefing for Apollo 11, Aldrin said it was a "rougher ride than the S-II" (second stage, which presumably 'averaged out' the roughness of each individual engine across the set of five, and had more structure between the engines and the crew cabin to damp vibrations through) and Armstrong said it was "a little rattly all the time". (These comments were in regard to the orbital insertion phase of the S-IVB but were probably applicable to the TLI as well.)
The crew of Apollo 10 found it a little rougher, with Stafford saying "Where the S-IC stage and the S-II stage were completely smooth, the S-IVB growled, rattled, and rolled during the whole burn. But you could actually feel little vibrations."
Conrad on Apollo 12 was more positive: "S-IVB ignition was smooth. The ride on the S-IVB was very nice."
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
$endgroup$
add a comment |
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.6g, increasing as fuel mass is exhausted, and finishing up around 1.45g, according to this graph from the Apollo 11 flight evaluation report:
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
There was some vibration noticed by the crew during the S-IVB burns. For subjective impressions, the best source is the crew debriefings done after each mission, though in this case they're surprisingly varied.
In the debriefing for Apollo 11, Aldrin said it was a "rougher ride than the S-II" (second stage, which presumably 'averaged out' the roughness of each individual engine across the set of five, and had more structure between the engines and the crew cabin to damp vibrations through) and Armstrong said it was "a little rattly all the time". (These comments were in regard to the orbital insertion phase of the S-IVB but were probably applicable to the TLI as well.)
The crew of Apollo 10 found it a little rougher, with Stafford saying "Where the S-IC stage and the S-II stage were completely smooth, the S-IVB growled, rattled, and rolled during the whole burn. But you could actually feel little vibrations."
Conrad on Apollo 12 was more positive: "S-IVB ignition was smooth. The ride on the S-IVB was very nice."
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
$endgroup$
add a comment |
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.6g, increasing as fuel mass is exhausted, and finishing up around 1.45g, according to this graph from the Apollo 11 flight evaluation report:
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
There was some vibration noticed by the crew during the S-IVB burns. For subjective impressions, the best source is the crew debriefings done after each mission, though in this case they're surprisingly varied.
In the debriefing for Apollo 11, Aldrin said it was a "rougher ride than the S-II" (second stage, which presumably 'averaged out' the roughness of each individual engine across the set of five, and had more structure between the engines and the crew cabin to damp vibrations through) and Armstrong said it was "a little rattly all the time". (These comments were in regard to the orbital insertion phase of the S-IVB but were probably applicable to the TLI as well.)
The crew of Apollo 10 found it a little rougher, with Stafford saying "Where the S-IC stage and the S-II stage were completely smooth, the S-IVB growled, rattled, and rolled during the whole burn. But you could actually feel little vibrations."
Conrad on Apollo 12 was more positive: "S-IVB ignition was smooth. The ride on the S-IVB was very nice."
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
$endgroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.6g, increasing as fuel mass is exhausted, and finishing up around 1.45g, according to this graph from the Apollo 11 flight evaluation report:
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
There was some vibration noticed by the crew during the S-IVB burns. For subjective impressions, the best source is the crew debriefings done after each mission, though in this case they're surprisingly varied.
In the debriefing for Apollo 11, Aldrin said it was a "rougher ride than the S-II" (second stage, which presumably 'averaged out' the roughness of each individual engine across the set of five, and had more structure between the engines and the crew cabin to damp vibrations through) and Armstrong said it was "a little rattly all the time". (These comments were in regard to the orbital insertion phase of the S-IVB but were probably applicable to the TLI as well.)
The crew of Apollo 10 found it a little rougher, with Stafford saying "Where the S-IC stage and the S-II stage were completely smooth, the S-IVB growled, rattled, and rolled during the whole burn. But you could actually feel little vibrations."
Conrad on Apollo 12 was more positive: "S-IVB ignition was smooth. The ride on the S-IVB was very nice."
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
edited Apr 2 at 22:29
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
answered Apr 2 at 19:42
Russell BorogoveRussell Borogove
88.6k3298382
88.6k3298382
add a comment |
add a comment |
$begingroup$
This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
What were the G forces experienced by the Apollo astronauts during the translunar injection burn?
My Haynes doesn't seem to give specific figures, but the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph above leaves off and increase somewhat as the fuel was depleted. It would also jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
edited Apr 2 at 22:42
uhoh
40.2k18149507
answered Apr 2 at 20:49
GregGreg
98939
$endgroup$
3
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
Apr 2 at 21:26
1
$begingroup$
Dangit! I guess I didn't notice that. And my Haynes doesn't seem to give specific figures. But the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph left off and increased a bit as the fuel was depleted, then jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
$endgroup$
– Greg
Apr 2 at 21:37
$begingroup$
@Greg I've added your comment back into your answer, does that look okay?
$endgroup$
– uhoh
Apr 2 at 22:42
$begingroup$
uhoh That looks fine, thanks.
$endgroup$
– Greg
2 days ago
add a comment |
$begingroup$
This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
What were the G forces experienced by the Apollo astronauts during the translunar injection burn?
My Haynes doesn't seem to give specific figures, but the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph above leaves off and increase somewhat as the fuel was depleted. It would also jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
edited Apr 2 at 22:42
uhoh
40.2k18149507
answered Apr 2 at 20:49
GregGreg
98939
$endgroup$
3
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
Apr 2 at 21:26
1
$begingroup$
Dangit! I guess I didn't notice that. And my Haynes doesn't seem to give specific figures. But the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph left off and increased a bit as the fuel was depleted, then jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
$endgroup$
– Greg
Apr 2 at 21:37
$begingroup$
@Greg I've added your comment back into your answer, does that look okay?
$endgroup$
– uhoh
Apr 2 at 22:42
$begingroup$
uhoh That looks fine, thanks.
$endgroup$
– Greg
2 days ago
add a comment |
$begingroup$
This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
What were the G forces experienced by the Apollo astronauts during the translunar injection burn?
My Haynes doesn't seem to give specific figures, but the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph above leaves off and increase somewhat as the fuel was depleted. It would also jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
edited Apr 2 at 22:42
uhoh
40.2k18149507
answered Apr 2 at 20:49
GregGreg
98939
$endgroup$
This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
What were the G forces experienced by the Apollo astronauts during the translunar injection burn?
My Haynes doesn't seem to give specific figures, but the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph above leaves off and increase somewhat as the fuel was depleted. It would also jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
edited Apr 2 at 22:42
uhoh
40.2k18149507
answered Apr 2 at 20:49
GregGreg
98939
edited Apr 2 at 22:42
uhoh
40.2k18149507
edited Apr 2 at 22:42
uhoh
40.2k18149507
edited Apr 2 at 22:42
uhoh
40.2k18149507
40.2k18149507
answered Apr 2 at 20:49
GregGreg
98939
answered Apr 2 at 20:49
GregGreg
98939
answered Apr 2 at 20:49
GregGreg
98939
98939
3
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
Apr 2 at 21:26
1
$begingroup$
Dangit! I guess I didn't notice that. And my Haynes doesn't seem to give specific figures. But the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph left off and increased a bit as the fuel was depleted, then jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
$endgroup$
– Greg
Apr 2 at 21:37
$begingroup$
@Greg I've added your comment back into your answer, does that look okay?
$endgroup$
– uhoh
Apr 2 at 22:42
$begingroup$
uhoh That looks fine, thanks.
$endgroup$
– Greg
2 days ago
add a comment |
3
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
Apr 2 at 21:26
1
$begingroup$
Dangit! I guess I didn't notice that. And my Haynes doesn't seem to give specific figures. But the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph left off and increased a bit as the fuel was depleted, then jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
$endgroup$
– Greg
Apr 2 at 21:37
$begingroup$
@Greg I've added your comment back into your answer, does that look okay?
$endgroup$
– uhoh
Apr 2 at 22:42
$begingroup$
uhoh That looks fine, thanks.
$endgroup$
– Greg
2 days ago
3
3
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
Apr 2 at 21:26
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
Apr 2 at 21:26
1
1
$begingroup$
Dangit! I guess I didn't notice that. And my Haynes doesn't seem to give specific figures. But the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph left off and increased a bit as the fuel was depleted, then jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
$endgroup$
– Greg
Apr 2 at 21:37
$begingroup$
Dangit! I guess I didn't notice that. And my Haynes doesn't seem to give specific figures. But the S-IVB had a single engine, and they didn't try to throttle it. So the acceleration would have picked up where the graph left off and increased a bit as the fuel was depleted, then jump 13% when the LOX/LH2 ratio switched from 4.5:1 to 5.0:1.
$endgroup$
– Greg
Apr 2 at 21:37
$begingroup$
@Greg I've added your comment back into your answer, does that look okay?
$endgroup$
– uhoh
Apr 2 at 22:42
$begingroup$
@Greg I've added your comment back into your answer, does that look okay?
$endgroup$
– uhoh
Apr 2 at 22:42
$begingroup$
uhoh That looks fine, thanks.
$endgroup$
– Greg
2 days ago
$begingroup$
uhoh That looks fine, thanks.
$endgroup$
– Greg
2 days ago
add a comment |
Thanks for contributing an answer to Space Exploration Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35244%2fwhat-are-the-g-forces-leaving-earth-orbit%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
Apr 2 at 20:17