hostapd not working anymoreWhy is hostapd not working?hostapd, rtl8192se and wpa not working: EAPOL-Key TimeoutHow to link hostapd to physical wireless card via ethernet?Linux Hostapd registers as WEP, but I want WPA2-PSKHostapd with ACS not working due to not collecting survey datahostapd Wired 802.1x with BridgeHow to redirect a URL from hostapd without internet access?Windows 10 clients can't connect to HostAPDHostapd - Download speed artificially limited?Configure hostapd to accept password multiple WPA2 PSKs
Shell builtin `printf` line limit?
Why is this python script running in background consuming 100 % CPU?
Informal question construction: "Anyone know what...", "Everyone finished?"
Is being an extrovert a necessary condition to be a manager?
Is there any mention of ghosts who live outside the Hogwarts castle?
Why is Ni[(PPh₃)₂Cl₂] tetrahedral?
Can a UK national work as a paid shop assistant in the USA?
Coloring lines in a graph the same color if they are the same length
Why is 'additive' EQ more difficult to use than 'subtractive'?
Writing "hahaha" versus describing the laugh
What technology is there beyond RAID for disk cluster in a server
Johnson-Nyquist noise for a lossy inductor?
What to call a small, open stone or cement reservoir that supplies fresh water from a spring or other natural source?
Can diplomats be allowed on the flight deck of a commercial European airline?
How to make Flex Markers appear in Logic Pro X?
Three knights or knaves, three different hair colors
Real Analysis: Proof of the equivalent definitions of the derivative.
Passport queue length in UK in relation to arrival method
Is Enceladus the moon with salty water?
Why "strap-on" boosters, and how do other people say it?
Is there a word for pant sleeves?
Keeping the dodos out of the field
amsmath: How can I use the equation numbering and label manually and anywhere?
Managing heat dissipation in a magic wand
hostapd not working anymore
Why is hostapd not working?hostapd, rtl8192se and wpa not working: EAPOL-Key TimeoutHow to link hostapd to physical wireless card via ethernet?Linux Hostapd registers as WEP, but I want WPA2-PSKHostapd with ACS not working due to not collecting survey datahostapd Wired 802.1x with BridgeHow to redirect a URL from hostapd without internet access?Windows 10 clients can't connect to HostAPDHostapd - Download speed artificially limited?Configure hostapd to accept password multiple WPA2 PSKs
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty height:90px;width:728px;box-sizing:border-box;
1
I had a working hostapd file and a functioning wifi hotspot (device is busybox, iMX6 board). While the hotspot was up and running, I was doing manual routing connected to the device via ssh (I'm able to connect this device via another device's access point, I first connect to the access point using my PC and then ssh into the aforementioned device). However, during my last command, ssh got stuck, hence I decided to power cycle.
After the power cycle, the previous commands (which used to work everytime, even after power cycles) does not work anymore. Here is how I normally would setup the hotspot.
First I would create a virtual interface from wlan0, which is active on startup.
iw dev wlan0 interface add wlan0_ap2 type managed addr 12:34:56:78:ab:ce
wlan0 interface is also what allows me to ssh into this device. wlan0 is connected to wlan0-ap of another board. My PC is also connected to wlan0-ap network. After ssh'ing into the device, I would start hostapd config like so:
hostapd -dd /etc/hostapd_build_ap.conf
After that, hotstop would be detectable and connectable by external devices. I do not normally setup a dhcp server, static IP is okay for me.
Here is the hostapd_build_ap.conf file:
interface=wlan0_ap2
#bridge=br0
ssid=myhotspot
driver=nl80211
country_code=US
hw_mode=g
channel=10
max_num_sta=5
wpa=2
auth_algs=1
wpa_passphrase=ABABABABAB
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
After certain routings are done via "route add ..."
I would normally be able to use both devices as access points connected to each other. Yet, after my last routing, like said, ssh got inresponsive and I had to power cycle. (There is no other way of accessing the device at the moment)
Now, when I try to start hostapd, I get this:
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd_build_ap.conf
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: interface wlan0_ap2 in phy phy0
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Setup AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x57d950
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x57d950 match=
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x57d950 match=
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x57d950 match=
nl80211: Add own interface ifindex 4
nl80211: if_indices[16]: 4
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0_ap2: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code 98, new country code US
Continue interface setup after channel list update
ctrl_iface not configured!
random: Got 20/20 bytes from /dev/random
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff d0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6dd0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff f0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6df0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 00 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-37 fc=0x40 seq_ctrl=0x6e00 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 50 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-41 fc=0x40 seq_ctrl=0x6e50 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
Channel list update timeout - try to continue anyway
nl80211: Regulatory information - country=98
nl80211: 2402-2482 @ 40 MHz 20 mBm
nl80211: 5170-5250 @ 80 MHz 23 mBm
nl80211: 5250-5330 @ 80 MHz 23 mBm (DFS)
nl80211: 5735-5835 @ 80 MHz 30 mBm
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
Completing interface initialization
Mode: IEEE 802.11g Channel: 10 Frequency: 2457 MHz
DFS 0 channels required radar detection
nl80211: Set freq 2457 (ht_enabled=0, vht_enabled=0, bandwidth=20 MHz, cf1=2457 MHz, cf2=0 MHz)
* freq=2457
* vht_enabled=0
* ht_enabled=0
RATE[0] rate=10 flags=0x1
RATE[1] rate=20 flags=0x1
RATE[2] rate=55 flags=0x1
RATE[3] rate=110 flags=0x1
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
hostapd_setup_bss(hapd=0x57cf48 (wlan0_ap2), first=1)
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 02 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
Using interface wlan0_ap2 with hwaddr 12:34:56:78:ab:ce and ssid "myhotspot"
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=108
GMK - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=76
Key Counter - hexdump(len=32): [REMOVED]
WPA: Delay group state machine start until Beacon frames have been configured
nl80211: Set beacon (beacon_set=0)
nl80211: Beacon head - hexdump(len=60): 80 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 09 6d 79 68 6f 74 73 70 6f 74 01 08 82 84 8b 96 0c 12 18 24 03 01 0a
nl80211: Beacon tail - hexdump(len=41): 2a 01 04 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 00 00 00 40
nl80211: ifindex=4
nl80211: beacon_int=100
nl80211: dtim_period=2
nl80211: ssid - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
* beacon_int=100
nl80211: hidden SSID not in use
nl80211: privacy=1
nl80211: auth_algs=0x1
nl80211: wpa_version=0x2
nl80211: key_mgmt_suites=0x2
nl80211: pairwise_ciphers=0x18
nl80211: group_cipher=0x10
nl80211: SMPS mode - off
nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: Beacon set failed: -16 (Device or resource busy)
Failed to set beacon parameters
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
hostapd_free_hapd_data(wlan0_ap2)
Interface initialization failed
wlan0_ap2: interface state COUNTRY_UPDATE->DISABLED
wlan0_ap2: AP-DISABLED
hostapd_interface_deinit_free(0x57c308)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x57c308)
wlan0_ap2: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0_ap2
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wlan0_ap2: AP-DISABLED
hostapd_cleanup(hapd=0x57cf48 (wlan0_ap2))
hostapd_free_hapd_data: Interface wlan0_ap2 wasn't started
hostapd_interface_deinit_free: driver=0x977b0 drv_priv=0x57d818 -> hapd_deinit
nl80211: deinit ifname=wlan0_ap2 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=4)
netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Teardown AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x88df51d9 (AP teardown)
hostapd_interface_free(0x57c308)
hostapd_interface_free: free hapd 0x57cf48
hostapd_cleanup_iface(0x57c308)
hostapd_cleanup_iface_partial(0x57c308)
hostapd_cleanup_iface: free iface=0x57c308
Could it be that hostapd got corrupted during power cycle? What could be the cause of this?
Does the problem start here?
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
linux-networking iproute2 hostapd iproute
asked May 8 at 10:49
MaximusMaximus
1062
add a comment |
1
I had a working hostapd file and a functioning wifi hotspot (device is busybox, iMX6 board). While the hotspot was up and running, I was doing manual routing connected to the device via ssh (I'm able to connect this device via another device's access point, I first connect to the access point using my PC and then ssh into the aforementioned device). However, during my last command, ssh got stuck, hence I decided to power cycle.
After the power cycle, the previous commands (which used to work everytime, even after power cycles) does not work anymore. Here is how I normally would setup the hotspot.
First I would create a virtual interface from wlan0, which is active on startup.
iw dev wlan0 interface add wlan0_ap2 type managed addr 12:34:56:78:ab:ce
wlan0 interface is also what allows me to ssh into this device. wlan0 is connected to wlan0-ap of another board. My PC is also connected to wlan0-ap network. After ssh'ing into the device, I would start hostapd config like so:
hostapd -dd /etc/hostapd_build_ap.conf
After that, hotstop would be detectable and connectable by external devices. I do not normally setup a dhcp server, static IP is okay for me.
Here is the hostapd_build_ap.conf file:
interface=wlan0_ap2
#bridge=br0
ssid=myhotspot
driver=nl80211
country_code=US
hw_mode=g
channel=10
max_num_sta=5
wpa=2
auth_algs=1
wpa_passphrase=ABABABABAB
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
After certain routings are done via "route add ..."
I would normally be able to use both devices as access points connected to each other. Yet, after my last routing, like said, ssh got inresponsive and I had to power cycle. (There is no other way of accessing the device at the moment)
Now, when I try to start hostapd, I get this:
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd_build_ap.conf
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: interface wlan0_ap2 in phy phy0
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Setup AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x57d950
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x57d950 match=
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x57d950 match=
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x57d950 match=
nl80211: Add own interface ifindex 4
nl80211: if_indices[16]: 4
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0_ap2: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code 98, new country code US
Continue interface setup after channel list update
ctrl_iface not configured!
random: Got 20/20 bytes from /dev/random
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff d0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6dd0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff f0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6df0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 00 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-37 fc=0x40 seq_ctrl=0x6e00 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 50 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-41 fc=0x40 seq_ctrl=0x6e50 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
Channel list update timeout - try to continue anyway
nl80211: Regulatory information - country=98
nl80211: 2402-2482 @ 40 MHz 20 mBm
nl80211: 5170-5250 @ 80 MHz 23 mBm
nl80211: 5250-5330 @ 80 MHz 23 mBm (DFS)
nl80211: 5735-5835 @ 80 MHz 30 mBm
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
Completing interface initialization
Mode: IEEE 802.11g Channel: 10 Frequency: 2457 MHz
DFS 0 channels required radar detection
nl80211: Set freq 2457 (ht_enabled=0, vht_enabled=0, bandwidth=20 MHz, cf1=2457 MHz, cf2=0 MHz)
* freq=2457
* vht_enabled=0
* ht_enabled=0
RATE[0] rate=10 flags=0x1
RATE[1] rate=20 flags=0x1
RATE[2] rate=55 flags=0x1
RATE[3] rate=110 flags=0x1
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
hostapd_setup_bss(hapd=0x57cf48 (wlan0_ap2), first=1)
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 02 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
Using interface wlan0_ap2 with hwaddr 12:34:56:78:ab:ce and ssid "myhotspot"
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=108
GMK - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=76
Key Counter - hexdump(len=32): [REMOVED]
WPA: Delay group state machine start until Beacon frames have been configured
nl80211: Set beacon (beacon_set=0)
nl80211: Beacon head - hexdump(len=60): 80 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 09 6d 79 68 6f 74 73 70 6f 74 01 08 82 84 8b 96 0c 12 18 24 03 01 0a
nl80211: Beacon tail - hexdump(len=41): 2a 01 04 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 00 00 00 40
nl80211: ifindex=4
nl80211: beacon_int=100
nl80211: dtim_period=2
nl80211: ssid - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
* beacon_int=100
nl80211: hidden SSID not in use
nl80211: privacy=1
nl80211: auth_algs=0x1
nl80211: wpa_version=0x2
nl80211: key_mgmt_suites=0x2
nl80211: pairwise_ciphers=0x18
nl80211: group_cipher=0x10
nl80211: SMPS mode - off
nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: Beacon set failed: -16 (Device or resource busy)
Failed to set beacon parameters
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
hostapd_free_hapd_data(wlan0_ap2)
Interface initialization failed
wlan0_ap2: interface state COUNTRY_UPDATE->DISABLED
wlan0_ap2: AP-DISABLED
hostapd_interface_deinit_free(0x57c308)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x57c308)
wlan0_ap2: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0_ap2
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wlan0_ap2: AP-DISABLED
hostapd_cleanup(hapd=0x57cf48 (wlan0_ap2))
hostapd_free_hapd_data: Interface wlan0_ap2 wasn't started
hostapd_interface_deinit_free: driver=0x977b0 drv_priv=0x57d818 -> hapd_deinit
nl80211: deinit ifname=wlan0_ap2 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=4)
netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Teardown AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x88df51d9 (AP teardown)
hostapd_interface_free(0x57c308)
hostapd_interface_free: free hapd 0x57cf48
hostapd_cleanup_iface(0x57c308)
hostapd_cleanup_iface_partial(0x57c308)
hostapd_cleanup_iface: free iface=0x57c308
Could it be that hostapd got corrupted during power cycle? What could be the cause of this?
Does the problem start here?
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
linux-networking iproute2 hostapd iproute
asked May 8 at 10:49
MaximusMaximus
1062
add a comment |
1
1
1
I had a working hostapd file and a functioning wifi hotspot (device is busybox, iMX6 board). While the hotspot was up and running, I was doing manual routing connected to the device via ssh (I'm able to connect this device via another device's access point, I first connect to the access point using my PC and then ssh into the aforementioned device). However, during my last command, ssh got stuck, hence I decided to power cycle.
After the power cycle, the previous commands (which used to work everytime, even after power cycles) does not work anymore. Here is how I normally would setup the hotspot.
First I would create a virtual interface from wlan0, which is active on startup.
iw dev wlan0 interface add wlan0_ap2 type managed addr 12:34:56:78:ab:ce
wlan0 interface is also what allows me to ssh into this device. wlan0 is connected to wlan0-ap of another board. My PC is also connected to wlan0-ap network. After ssh'ing into the device, I would start hostapd config like so:
hostapd -dd /etc/hostapd_build_ap.conf
After that, hotstop would be detectable and connectable by external devices. I do not normally setup a dhcp server, static IP is okay for me.
Here is the hostapd_build_ap.conf file:
interface=wlan0_ap2
#bridge=br0
ssid=myhotspot
driver=nl80211
country_code=US
hw_mode=g
channel=10
max_num_sta=5
wpa=2
auth_algs=1
wpa_passphrase=ABABABABAB
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
After certain routings are done via "route add ..."
I would normally be able to use both devices as access points connected to each other. Yet, after my last routing, like said, ssh got inresponsive and I had to power cycle. (There is no other way of accessing the device at the moment)
Now, when I try to start hostapd, I get this:
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd_build_ap.conf
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: interface wlan0_ap2 in phy phy0
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Setup AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x57d950
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x57d950 match=
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x57d950 match=
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x57d950 match=
nl80211: Add own interface ifindex 4
nl80211: if_indices[16]: 4
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0_ap2: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code 98, new country code US
Continue interface setup after channel list update
ctrl_iface not configured!
random: Got 20/20 bytes from /dev/random
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff d0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6dd0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff f0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6df0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 00 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-37 fc=0x40 seq_ctrl=0x6e00 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 50 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-41 fc=0x40 seq_ctrl=0x6e50 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
Channel list update timeout - try to continue anyway
nl80211: Regulatory information - country=98
nl80211: 2402-2482 @ 40 MHz 20 mBm
nl80211: 5170-5250 @ 80 MHz 23 mBm
nl80211: 5250-5330 @ 80 MHz 23 mBm (DFS)
nl80211: 5735-5835 @ 80 MHz 30 mBm
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
Completing interface initialization
Mode: IEEE 802.11g Channel: 10 Frequency: 2457 MHz
DFS 0 channels required radar detection
nl80211: Set freq 2457 (ht_enabled=0, vht_enabled=0, bandwidth=20 MHz, cf1=2457 MHz, cf2=0 MHz)
* freq=2457
* vht_enabled=0
* ht_enabled=0
RATE[0] rate=10 flags=0x1
RATE[1] rate=20 flags=0x1
RATE[2] rate=55 flags=0x1
RATE[3] rate=110 flags=0x1
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
hostapd_setup_bss(hapd=0x57cf48 (wlan0_ap2), first=1)
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 02 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
Using interface wlan0_ap2 with hwaddr 12:34:56:78:ab:ce and ssid "myhotspot"
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=108
GMK - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=76
Key Counter - hexdump(len=32): [REMOVED]
WPA: Delay group state machine start until Beacon frames have been configured
nl80211: Set beacon (beacon_set=0)
nl80211: Beacon head - hexdump(len=60): 80 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 09 6d 79 68 6f 74 73 70 6f 74 01 08 82 84 8b 96 0c 12 18 24 03 01 0a
nl80211: Beacon tail - hexdump(len=41): 2a 01 04 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 00 00 00 40
nl80211: ifindex=4
nl80211: beacon_int=100
nl80211: dtim_period=2
nl80211: ssid - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
* beacon_int=100
nl80211: hidden SSID not in use
nl80211: privacy=1
nl80211: auth_algs=0x1
nl80211: wpa_version=0x2
nl80211: key_mgmt_suites=0x2
nl80211: pairwise_ciphers=0x18
nl80211: group_cipher=0x10
nl80211: SMPS mode - off
nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: Beacon set failed: -16 (Device or resource busy)
Failed to set beacon parameters
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
hostapd_free_hapd_data(wlan0_ap2)
Interface initialization failed
wlan0_ap2: interface state COUNTRY_UPDATE->DISABLED
wlan0_ap2: AP-DISABLED
hostapd_interface_deinit_free(0x57c308)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x57c308)
wlan0_ap2: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0_ap2
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wlan0_ap2: AP-DISABLED
hostapd_cleanup(hapd=0x57cf48 (wlan0_ap2))
hostapd_free_hapd_data: Interface wlan0_ap2 wasn't started
hostapd_interface_deinit_free: driver=0x977b0 drv_priv=0x57d818 -> hapd_deinit
nl80211: deinit ifname=wlan0_ap2 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=4)
netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Teardown AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x88df51d9 (AP teardown)
hostapd_interface_free(0x57c308)
hostapd_interface_free: free hapd 0x57cf48
hostapd_cleanup_iface(0x57c308)
hostapd_cleanup_iface_partial(0x57c308)
hostapd_cleanup_iface: free iface=0x57c308
Could it be that hostapd got corrupted during power cycle? What could be the cause of this?
Does the problem start here?
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
linux-networking iproute2 hostapd iproute
asked May 8 at 10:49
MaximusMaximus
1062
I had a working hostapd file and a functioning wifi hotspot (device is busybox, iMX6 board). While the hotspot was up and running, I was doing manual routing connected to the device via ssh (I'm able to connect this device via another device's access point, I first connect to the access point using my PC and then ssh into the aforementioned device). However, during my last command, ssh got stuck, hence I decided to power cycle.
After the power cycle, the previous commands (which used to work everytime, even after power cycles) does not work anymore. Here is how I normally would setup the hotspot.
First I would create a virtual interface from wlan0, which is active on startup.
iw dev wlan0 interface add wlan0_ap2 type managed addr 12:34:56:78:ab:ce
wlan0 interface is also what allows me to ssh into this device. wlan0 is connected to wlan0-ap of another board. My PC is also connected to wlan0-ap network. After ssh'ing into the device, I would start hostapd config like so:
hostapd -dd /etc/hostapd_build_ap.conf
After that, hotstop would be detectable and connectable by external devices. I do not normally setup a dhcp server, static IP is okay for me.
Here is the hostapd_build_ap.conf file:
interface=wlan0_ap2
#bridge=br0
ssid=myhotspot
driver=nl80211
country_code=US
hw_mode=g
channel=10
max_num_sta=5
wpa=2
auth_algs=1
wpa_passphrase=ABABABABAB
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
After certain routings are done via "route add ..."
I would normally be able to use both devices as access points connected to each other. Yet, after my last routing, like said, ssh got inresponsive and I had to power cycle. (There is no other way of accessing the device at the moment)
Now, when I try to start hostapd, I get this:
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd_build_ap.conf
rfkill: Cannot open RFKILL control device
nl80211: RFKILL status not available
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:13
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: interface wlan0_ap2 in phy phy0
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Setup AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x57d950
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x57d950 match=
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x57d950 match=
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x57d950 match=
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x57d950 match=
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x57d950 match=
nl80211: Add own interface ifindex 4
nl80211: if_indices[16]: 4
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0_ap2: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code 98, new country code US
Continue interface setup after channel list update
ctrl_iface not configured!
random: Got 20/20 bytes from /dev/random
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff d0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6dd0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff f0 6d 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-43 fc=0x40 seq_ctrl=0x6df0 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 00 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-37 fc=0x40 seq_ctrl=0x6e00 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
nl80211: Event message available
nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0_ap2
nl80211: MLME event 59 (NL80211_CMD_FRAME) on wlan0_ap2(12:34:56:78:ab:ce) A1=ff:ff:ff:ff:ff:ff A2=bc:a9:20:47:0d:ee
nl80211: MLME event frame - hexdump(len=130): 40 00 00 00 ff ff ff ff ff ff bc a9 20 47 0d ee ff ff ff ff ff ff 50 6e 00 04 41 52 4f 58 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c 03 01 0b 2d 1a 21 40 17 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 08 84 00 00 00 40 6b 07 0f ff ff ff ff ff ff dd 0b 00 17 f2 0a 00 01 04 00 00 00 00 dd 08 00 50 f2 08 00 0e 00 00 dd 09 00 10 18 02 01 00 10 00 00
nl80211: Frame event
nl80211: RX frame sa=bc:a9:20:47:0d:ee freq=2462 ssi_signal=-41 fc=0x40 seq_ctrl=0x6e50 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=130
Channel list update timeout - try to continue anyway
nl80211: Regulatory information - country=98
nl80211: 2402-2482 @ 40 MHz 20 mBm
nl80211: 5170-5250 @ 80 MHz 23 mBm
nl80211: 5250-5330 @ 80 MHz 23 mBm (DFS)
nl80211: 5735-5835 @ 80 MHz 30 mBm
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
Completing interface initialization
Mode: IEEE 802.11g Channel: 10 Frequency: 2457 MHz
DFS 0 channels required radar detection
nl80211: Set freq 2457 (ht_enabled=0, vht_enabled=0, bandwidth=20 MHz, cf1=2457 MHz, cf2=0 MHz)
* freq=2457
* vht_enabled=0
* ht_enabled=0
RATE[0] rate=10 flags=0x1
RATE[1] rate=20 flags=0x1
RATE[2] rate=55 flags=0x1
RATE[3] rate=110 flags=0x1
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
hostapd_setup_bss(hapd=0x57cf48 (wlan0_ap2), first=1)
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 02 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
Using interface wlan0_ap2 with hwaddr 12:34:56:78:ab:ce and ssid "myhotspot"
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=108
GMK - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=76
Key Counter - hexdump(len=32): [REMOVED]
WPA: Delay group state machine start until Beacon frames have been configured
nl80211: Set beacon (beacon_set=0)
nl80211: Beacon head - hexdump(len=60): 80 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 09 6d 79 68 6f 74 73 70 6f 74 01 08 82 84 8b 96 0c 12 18 24 03 01 0a
nl80211: Beacon tail - hexdump(len=41): 2a 01 04 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 00 00 00 40
nl80211: ifindex=4
nl80211: beacon_int=100
nl80211: dtim_period=2
nl80211: ssid - hexdump_ascii(len=9):
6d 79 68 6f 74 73 70 6f 74 myhotspot
* beacon_int=100
nl80211: hidden SSID not in use
nl80211: privacy=1
nl80211: auth_algs=0x1
nl80211: wpa_version=0x2
nl80211: key_mgmt_suites=0x2
nl80211: pairwise_ciphers=0x18
nl80211: group_cipher=0x10
nl80211: SMPS mode - off
nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: Beacon set failed: -16 (Device or resource busy)
Failed to set beacon parameters
wlan0_ap2: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0_ap2 (all)
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0_ap2) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
hostapd_free_hapd_data(wlan0_ap2)
Interface initialization failed
wlan0_ap2: interface state COUNTRY_UPDATE->DISABLED
wlan0_ap2: AP-DISABLED
hostapd_interface_deinit_free(0x57c308)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x57c308)
wlan0_ap2: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0_ap2
wlan0_ap2: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=2457
nl80211: send_frame -> send_frame_cmd
nl80211: CMD_FRAME freq=2457 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 12 34 56 78 ab ce 12 34 56 78 ab ce 00 00 03 00
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
wlan0_ap2: AP-DISABLED
hostapd_cleanup(hapd=0x57cf48 (wlan0_ap2))
hostapd_free_hapd_data: Interface wlan0_ap2 wasn't started
hostapd_interface_deinit_free: driver=0x977b0 drv_priv=0x57d818 -> hapd_deinit
nl80211: deinit ifname=wlan0_ap2 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=4)
netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Teardown AP(wlan0_ap2) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x88df51d9 (AP teardown)
hostapd_interface_free(0x57c308)
hostapd_interface_free: free hapd 0x57cf48
hostapd_cleanup_iface(0x57c308)
hostapd_cleanup_iface_partial(0x57c308)
hostapd_cleanup_iface: free iface=0x57c308
Could it be that hostapd got corrupted during power cycle? What could be the cause of this?
Does the problem start here?
nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2457 wait=0)
linux-networking iproute2 hostapd iproute
linux-networking iproute2 hostapd iproute
asked May 8 at 10:49
MaximusMaximus
1062
asked May 8 at 10:49
MaximusMaximus
1062
asked May 8 at 10:49
MaximusMaximus
1062
asked May 8 at 10:49
MaximusMaximus
1062
asked May 8 at 10:49
MaximusMaximus
1062
1062
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
0
Okay I got the solution,
Since this device has
valid interface combinations:
* # managed <= 2048, # AP <= 8, # P2P-client, P2P-GO <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match
Specifically,
#channels <= 1
AP and wlan0 must share the same channel.
I checked the channel of wlan0 using
iw wlan0 info
And turns out it switched to channel 11. So, configuring the hostapd file accordingly solved the problem.
answered May 8 at 11:04
MaximusMaximus
1062
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "2"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f966352%2fhostapd-not-working-anymore%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
0
Okay I got the solution,
Since this device has
valid interface combinations:
* # managed <= 2048, # AP <= 8, # P2P-client, P2P-GO <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match
Specifically,
#channels <= 1
AP and wlan0 must share the same channel.
I checked the channel of wlan0 using
iw wlan0 info
And turns out it switched to channel 11. So, configuring the hostapd file accordingly solved the problem.
answered May 8 at 11:04
MaximusMaximus
1062
add a comment |
0
Okay I got the solution,
Since this device has
valid interface combinations:
* # managed <= 2048, # AP <= 8, # P2P-client, P2P-GO <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match
Specifically,
#channels <= 1
AP and wlan0 must share the same channel.
I checked the channel of wlan0 using
iw wlan0 info
And turns out it switched to channel 11. So, configuring the hostapd file accordingly solved the problem.
answered May 8 at 11:04
MaximusMaximus
1062
add a comment |
0
0
0
Okay I got the solution,
Since this device has
valid interface combinations:
* # managed <= 2048, # AP <= 8, # P2P-client, P2P-GO <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match
Specifically,
#channels <= 1
AP and wlan0 must share the same channel.
I checked the channel of wlan0 using
iw wlan0 info
And turns out it switched to channel 11. So, configuring the hostapd file accordingly solved the problem.
answered May 8 at 11:04
MaximusMaximus
1062
Okay I got the solution,
Since this device has
valid interface combinations:
* # managed <= 2048, # AP <= 8, # P2P-client, P2P-GO <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match
Specifically,
#channels <= 1
AP and wlan0 must share the same channel.
I checked the channel of wlan0 using
iw wlan0 info
And turns out it switched to channel 11. So, configuring the hostapd file accordingly solved the problem.
answered May 8 at 11:04
MaximusMaximus
1062
answered May 8 at 11:04
MaximusMaximus
1062
answered May 8 at 11:04
MaximusMaximus
1062
answered May 8 at 11:04
MaximusMaximus
1062
1062
add a comment |
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Server Fault!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f966352%2fhostapd-not-working-anymore%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
