Lava, magma (molten rock) emerging as a liquid onto Earth’s surface. The term lava is also used for the solidified rock formed by the cooling of a molten lava flow. The temperatures of molten lava range from about 700 to 1,200 °C (1,300 to 2,200 °F). The material can be very fluid, flowing almost like syrup, or it can be extremely stiff, scarcely flowing at all. The higher the lava’s silica content, the higher its viscosity.

Read More on This Topic

volcano: Lava, gas, and other hazards

The list of hazards associated with volcanic eruptions is long and varied: lava flows, explosions, toxic gas clouds, ash falls, pyroclastic…

Mafic (ferromagnesian, dark-coloured) lavas such as basalt characteristically form flows known by the Hawaiian names pahoehoe and aa (or a’a). Pahoehoe lava flows are characterized by smooth, gently undulating, or broadly hummocky surfaces. The liquid lava flowing beneath a thin, still-plastic crust drags and wrinkles it into tapestry-like folds and rolls resembling twisted rope. Pahoehoe lava flows are fed almost wholly internally by streams of liquid lava flowing beneath a solidified or partly solidified surface. Typically, the margin of a pahoehoe flow advances by protruding one small toe or lobe after another.

In contrast to pahoehoe, the surface of aa lava is exceedingly rough, covered with a layer of partly loose, very irregular fragments commonly called clinkers. Aa lava flows are fed principally by rivers of liquid lava flowing in open channels. Typically, such a feeding river forms a narrow band that is 8 to 15 metres (25 to 50 feet) wide along the centre line of the flow, with broad fields of less actively moving clinker on each side of it. At the front of the flow, clinkers from the top roll down and are overridden by the pasty centre layer, like a tread on an advancing bulldozer.

Pahoehoe and aa flows from the same erupting vent are usually identical in chemical composition. In fact, it is common for a flow that leaves the vent as pahoehoe to change to aa as it progresses downslope. The greater the viscosity and the greater the stirring of the liquid (as by rapid flow down a steep slope), the greater the tendency for the material to change from pahoehoe to aa. The reverse change rarely occurs.

Lavas of andesitic or intermediate composition commonly form a somewhat different type of flow, known as a block lava flow. These resemble aa in having tops consisting largely of loose rubble, but the fragments are more regular in shape, most of them polygons with fairly smooth sides. Flows of more siliceous lava tend to be even more fragmental than block flows.

Thin basaltic lava flows generally contain many holes, or vesicles, left by bubbles of gas frozen into the congealing liquid. Thick flows, which remain hot for long periods, may lose most of their gas before the lava congeals, and the resulting rock may be dense with few vesicles.

Pyroclastic flows, which are low-viscosity, fluidized mixtures of hot but solid volcanic fragments and hot gas, are often described in newspaper accounts as lava flows. This causes much confusion. Molten lava flows are relatively high-viscosity liquids, and most of them advance slowly (a few metres per minute to less than a metre per day). Pyroclastic flows move more like a dense, low-viscosity gas pouring down a slope and even move upslope if they have enough momentum; their downslope velocities often exceed 100 km (60 miles) per hour.